Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 187

Note: Enter commands in lowercase only; mixed case is for readability.
nbrWWN
nbrPort
lr_tid
red_ports
Note
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
slotnumber
portnumber
Examples To display fabric port information:
switch:admin> fabportshow 4/14
Fabric Port Information:
========================
Port:
State:
List:
List Count:
Flags:
nbrWWN:
nbrPort:
lr_tid:
red_ports:
10 11 62 63
Open commands pending:
======================
No commands pending
See Also
portShow
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
ECP RJT or retires exceeded
0x100000000
Segmented due to duplicated WWN
0x200000000
Segmented due to E_Port isolation
Neighboring switch's WWN
Neighboring switch's port
Link reset timer identifier and current state.
All E_Ports that are connected to the same neighboring switch
For bladed systems only, specifies the slot number of the port to display, followed
by a slash (/).
Specifies the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports.
62
P3
0x10068418
0
0x280120
10:00:00:60:69:80:06:cf
5
0x1005dbd8, IDLE STATE
2
fabPortShow
2-153