Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 585

Note: Enter commands in lowercase only; mixed case is for readability.
To set the shared secret:
switch:admin>secAuthSecret --set
This command sets up secret keys for the DH-CHAP authentication.
The minimum length of a secret key is 8 characters and maximum 40
characters. Setting up secret keys does not initiate DH-CHAP
authentication. If switch is configured to do DH-CHAP, it is performed
whenever a port or a switch is enabled.
Warning: Please use a secure channel for setting secrets. Using
an insecure channel is not safe and may compromise secrets.
Following inputs should be specified for each entry.
1. WWN for which secret is being set up.
2. Peer secret: The secret of the peer that authenticates to peer.
3. Local secret: The local secret that authenticates peer.
Press Enter to start setting up shared secrets >
Enter WWN, Domain, or switch name (Leave blank when done): 10:00:00:60:69:80:05:14
Enter peer secret:
Re-enter peer secret:
Enter local secret:
Re-enter local secret:
Enter WWN, Domain, or switch name (Leave blank when done):
Are you done? (yes, y, no, n): [no] y
Saving data to key store... Done.
To delete the entire secret key database:
switch:admin>secAuthSecret --remove --all
This command deletes database of DH-CHAP secret keys. If a fabric
requires authentication, deleting this database may cause switch
to segment from the fabric.
Do want to remove secret key database? (yes, y, no, n): [no] y
Deleting secret key database... Done.
switch:admin>
See Also none
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
2
secAuthSecret
2-551