Note: Enter commands in lowercase only; mixed case is for readability.
Examples
To display CP status, first on a healthy standby CP and then on a faulty standby CP:
switch:admin> hashow
Local CP (Slot 6, CP1): Active, Cold Recovered
Remote CP (Slot 5, CP0): Non-Redundant
switch:admin> hashow
Local CP (Slot 6, CP1): Active, Warm Recovered
Remote CP (Slot 5, CP0): Standby, Failed
HA enabled, Heartbeat Up, HA State not in sync
See Also
haDisable, haEnable,
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
Backplane PCI fail, severity: CRITICAL
haFailover
2
haShow
2-271