Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 354

Note: Enter commands in lowercase only; mixed case is for readability.
2
itemList
blade ports and user ports. A list of blade ports is most commonly used by ASIC-level tests such as
cmiTest
are tested. A list of user ports is used by the higher-level tests, such as
specify which user-accessible external ports within the current switch (selected during telnet login) are
tested. When specified in an item list, user ports might be specified by either the area portion of the ports
Fibre Channel address or with slot/port notation. For nonblade systems, the port number on the silkscreen
is the area number, so the two notations are identical.
The exact type of list required for any input parameter might be determined with the
diagCommandShow
type is one of those shown in the table.
Table 2-14
Type
BPORTS
UPORTS
QUADS
CHIPS
MINIS
SLOTS
INDEX
Operands none
Examples Refer to the command in next section for example outputs using itemList.
See Also backport, camTest, centralMemoryTest, cmemRetentionTest, cmiTest, crossPortTest,
diagCommandShow, portLoopbackTest, portRegTest, spinSilk,
2-320
or turboRamTest and represents which ports on the current blade (specified with --slot number)
test command. For item list parameters, the parameter type is PT_LIST and the list
Object Descriptions
Grouping
Blade
Switch
Blade
Blade
Blade
Chassis
n.a.
spinSilk
Description
Blade ports, internal and external ports
User ports, ports with external connections
Quadrants, group of (normally four) ports
Chips, ASICs within a blade
Mini-switches
Slots
Anything
sramRetentionTest
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
or crossPortTest, to