Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 527

Note: Enter commands in lowercase only; mixed case is for readability.
Port
Cmd
Args
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
sn Speed negotiation states
fcin Incoming fibre channel information unit
fcout Outgoing fibre channel information unit
read Information unit header log from read operation
write Information unit header log from write operation
err Information unit header log of an fc error frame
frame FC frame payload
nsRemQ
Interswitch name server query
rscn RSCN
xalloc Allocate an exchange
xfree Free an exchange
xerr Exchange error
xstate Exchange state
payload Frame payload
Displays the port number that logged the event.
Defined by the event. Displays a value defined by the event as follows:
ioctl I/O control command code
Tx & RxFrame payload size
scn New state (see state codes below)
pstate New physical state (see pstate codes below)
ctin The CT-subtype:
fc Simple Name Server
f8 Alias Server.
ctout Same as ctin above.
errlog Error level (refer to errShow)
loopscn Current loop state during loop initialization, possible values are:
OLP Offline (disconnected or nonparticipating)
LIP FL_Port entered INITIALIZING or OPEN_INIT state
LIM LISM completed, FL_Port became the loop master
BMP Loop init completed, FL_Port in MONITORING state
OLD Port transited to the OLD_PORT state
TMO Loop init times out
Displays additional information about the event as follows:
start Start type: 0 = enable ports, 100 = disable ports
2
portLogShow
2-493