Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 235

Note: Enter commands in lowercase only; mixed case is for readability.
-r importedFID devWWN
Examples
To display the persistent proxy device configuration:
fcr:admin> fcrproxyconfig
To persistently configure device WWN 00:11:22:33:44:55:66:77 to use slot f101h in fabric 5:
fcr:admin> fcrproxyconfig -s 5 00:11:22:33:44:55:66:77 f101
To remove device WWN 00:11:22:33:44:55:66:77 from its persistent slot in fabric 5:
fcr:admin> fcrproxyconfig -r 5 00:11:22:33:44:55:66:77
WWN deleted from proxy device slot
See Also fcrPhyDevShow, fcrProxyDevShow, fcrXlateConfig, lsanZoneShow,
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
"The specified slot already contains a WWN, overwrite? [y]" is displayed if the
specified slot already contains an entry. You are then prompted for overwrite
confirmation.
Removes the specified devWWN (format: XX:XX:XX:XX:XX:XX:XX:XX)
from its slot for the edge fabric specified by importedFID (1 through 128).
"WWN does not exist in any proxy device slot." is displayed if the WWN does not
exist in any slot for the specified edge fabric.
Imported FID
002 50:05:07:65:05:84:08:d7
002 50:05:07:65:05:84:0a:7b
002 22:00:00:20:37:c3:11:71
002 22:00:00:20:37:c3:1a:8a
003 10:00:00:00:c9:2b:6a:2c
fcrProxyConfig
Device WWN Slot
f001
f002
f001
f002
f001
switchShow
2
2-201