Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 42

Brocade fabric os command reference manual (53-1000240-01, november 2006)
Hide thumbs Also See for A7990A - StorageWorks SAN Director 4/16 Blade Switch:
Table of Contents

Advertisement

Note: Enter commands in lowercase only; mixed case is for readability.
2
ad
--rename ad_id new_ad_name
--save
--select ad_id
--show[-i | [ad_id [-m mode]]]
alone:
--validate[-i | [ad_id [-m mode]]]
2-8
operation remains in the transaction buffer until you issue
Renames the Admin Domain. If a reserved name is used for new_ad_id (AD
number format), the operation fails if the reserved name does not correspond to
ad_id's AD number. The rename operation remains in the transaction buffer until
you issue
ad
--apply or
ad
--save.
Saves the outstanding Admin Domain transaction to the defined configuration in
all the switches in the fabric. The saved Admin Domain definition enforces only
when
ad
--apply is issued. Otherwise, attempts to modify and save an Admin
Domain that is currently being enforced will fail.
confirmation before saving.
Selects a different Admin Domain context. This command fails if the
corresponding Admin Domain is not yet activated. This operation succeeds only
if you have rights to use the specified Admin Domain. This command internally
spawns off a new shell with the requested Admin Domain context. Type
or
exit
to exit from the selected Admin Domain. The zone transaction is linked to
the current shell; therefore, the zone transaction buffer will be lost on logout. You
can use
cfgTransShow
to display the current zoning transaction information.
Displays the membership information of the specified Admin Domain or all
Admin Domains.
When executed in AD255, if the Admin Domain name is not specified, all
information about all existing Admin Domains is displayed. When executed in an
AD0-AD254 context, the membership of the current Admin Domain's effective
configuration alone is always displayed and hence mode flags (-m mode) and
ad_id cannot be specified.
When executed in AD255 context, all Admin Domain information from the
transaction buffer, defined configuration and effective configuration is displayed.
A mode flag can be used to display information from a specific configuration
-m 0
to display Admin Domains in the Transaction Buffer
-m 1
to display Admin Domains in the Defined Configuration
-m 2
to display Admin Domains in the Effective Configuration
Use -i to display the implicit members of AD0. When -i option is used, ad_id
cannot be specified because -i applies to AD0 alone.
Checks whether Admin Domain members are from a non-Admin Domain aware
switch or if the members do not exist in the fabric. The output is similar to
show; however, all members that are from non-Admin Domain aware switches
and members that are not online are marked with an asterisk (*) or plus sign (+) at
the end, respectively.
FC Router Front Phantom Domain and FC Router Translate Phantom Domain are
virtual entities without any exposed management interfaces; hence, any FC Router
phantom switch WWNs specified in AD's switch memberlist will be marked as
non-Admin Domain aware members. All D,PI members in the device list
corresponding to an FC Router Phantom Domain will be marked as non-Admin
ad
--apply or
ad
ad
--save prompts for
logout
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
--save.
ad
--

Advertisement

Table of Contents
loading

Table of Contents