Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 147

Note: Enter commands in lowercase only; mixed case is for readability.
--allaccess
--show
Examples
To create a default zone configuration:
switch:admin> cfgactvshow
Effective configuration:
no configuration in effect
switch:admin> defzone --noaccess
switch:admin> cfgsave
switch:admin> defzone --show
Default Zone Access Mode
committed - All Access
transaction - No Transaction
See Also
none
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
Sets the default zone access mode to All Access, initiates a zoning transaction (if
one is not already in progress), and deletes the reserved zoning objects by doing
the equivalent to the following zoning commands:
• cfgDelete "d_efault_Cfg"
• zoneDelete "d_efault_Zone"
A cfgSave, cfgEnable, or cfgDisable
the use of this command to commit the changes and distribute them to the fabric.
If a cfgSave is performed and the fabric is already in the No Access default zone
state, a cfgDisable is sent to the fabric. For example:
switch:admin> defzone --allaccess
switch:admin> cfgsave
An audit log record is generated for each use of this command option.
Displays the current state of the default zone access mode.
defZone
command must be performed subsequent to
2
2-113