Urouteremove - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual

Note: Enter commands in lowercase only; mixed case is for readability.

uRouteRemove

Removes a static route.
Synopsis
urouteremove in_area domain
Description
Use this command to remove a previously configured static route.
After this command is issued, the route to domain for in_area might change to use a different output port,
only if dynamic load sharing (DLS) is set. If DLS is not set, the route remains as is, with its route attribute
changed from static to dynamic.
in_area can be either an F_Port or an E_Port.
Note
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands
This command has the following operands:
in_area
domain
Examples To remove a static route for all traffic coming in from port 1 and addressed to domain 2:
switch:admin> urouteremove 1 2
done.
See Also configShow, dlsShow, uRouteConfig,
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
Specify the input port of the static route to remove.
Specify the destination domain of the static route to remove.
uRouteShow
2
uRouteRemove
2-721