Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 123

Note: Enter commands in lowercase only; mixed case is for readability.
To download a configuration file interactively, on a non-AD aware switch running Fabric OS v5.1.0:
switch:admin> configdownload
configDownload: This command may not be executed on an operational switch.
You must first disable the switch using the "switchDisable" command.
switch:admin> switchdisable
switch:admin> configdownload
Protocol (scp or ftp) [ftp]: ftp
Server Name or IP Address [host]: 192.168.38.152
User Name [user]: jdoe
File Name [config.txt]: config51x_onSW3900
Password:
This command is used to download a backed-up configuration
for a specific switch.
switch, this file's configuration
any current switch settings.
file, which was uploaded
may cause this switch to fail.
required for some parameter changes to take effect.
Do you want to continue [y/n]: y
configDownload completed successfully. All parameters are downloaded.
switch:admin> switchenable
switch:admin>
See Also configDefault, configShow, configUpload,
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
*** CAUTION ***
If using a file from a
settings will
Downloading a configuration
from a different type of switch,
A switch reboot might be
configure
configDownload
different
override
2
2-89