Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 729

Note: Enter commands in lowercase only; mixed case is for readability.
Diagnostics
Each diagnostic test in this suit might report its own set of error messages when it detects failure(s). Refer
to the Diagnostics section of individual diagnostic test help pages. These messages are available only in
the log file.
Refer to the Fabric OS Message Reference for more information.
Examples To initiate a system verification test on all switches in the fabric:
switch:admin> systemverification -short
See Also
burninErrShow, burninStatus, diagSetBurnin,
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
systemverification: Setting parameters for short run.
systemverification: burnin parameters.
CURRENT - KEYWORD
1 - number_of_runs
2 - vib : 2
10 - thermal
SYSTEMVERIFICATION
2 - min_lb_mode
1 - tbr_passes
1 - prt_on
1 - cntmem_on
1 - cmi_on
1 - retention_on
1 - cam_on
1 - flt_passes
1 - sta_passes
1 - plb_nframes
1 - txd_nframes
1 - xpt_nframes
1 - bpt_nframes
1 - slk_nmegs
1 - bpt_all_nframes
1 - slk_all_nmegs : 50
systemverification: Arming the burnin run on switch 0.
systemverification: Starting burnin on Switch 0
systemverification: Monitoring progress of the burnin activity.
systemverification: Outputting Status
State Status
COMPLETED PASS
: DEFAULT
: 1
: 10
- label : BURNIN
: 2
: 1
: 1
: 1
: 1
: 1
: 1
: 50
: 25
: 100
: 50
: 200
: 20
: 50
: 30
Run Cmd TotCmds Script
1 22 22
diagSetCycle
systemVerification
switchburnin.sh
2
2-695