Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 68

Note: Enter commands in lowercase only; mixed case is for readability.
2
authUtil
To set DH-CHAP as the authentication protocol:
switch:admin> authutil --set -a dhchap
Authentication is set to dhchap.
To set both protocols in order of FCAP and then DH-CHAP:
switch:admin> authutil --set -a all
Authentication is set to fcap,dhchap.
To set DH group 3:
switch:admin> authutil --set -g 3
DH Group was set to 3.
To set all DH groups to be specified in auth negotiate in order of 0, 1, 2, 3, and 4:
switch:admin> authutil --set -g "*"
DH Group is set to 0,1,2,3,4
See Also
portShow,
2-34
secAuthSecret
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01