Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 217

Note: Enter commands in lowercase only; mixed case is for readability.
-q
source
destination
Examples
To display one device that accepts the request and another device that rejects the request:
switch:admin> fcping 10:00:00:00:c9:29:0e:c4 21:00:00:20:37:25:ad:05
Source:
Destination:
Zone Check:
Pinging 10:00:00:00:c9:29:0e:c4 [0x20800] with 12 bytes of data:
received reply from 10:00:00:00:c9:29:0e:c4: 12 bytes time:1162 usec
received reply from 10:00:00:00:c9:29:0e:c4: 12 bytes time:1013 usec
received reply from 10:00:00:00:c9:29:0e:c4: 12 bytes time:1442 usec
received reply from 10:00:00:00:c9:29:0e:c4: 12 bytes time:1052 usec
received reply from 10:00:00:00:c9:29:0e:c4: 12 bytes time:1012 usec
5 frames sent, 5 frames received, 0 frames rejected, 0 frames timeout
Round-trip min/avg/max = 1012/1136/1442 usec
Pinging 21:00:00:20:37:25:ad:05 [0x211e8] with 12 bytes of data:
Request rejected
Request rejected
Request rejected
Request rejected
Request rejected
5 frames sent, 0 frames received, 5 frames rejected, 0 frames timeout
Round-trip min/avg/max = 0/0/0 usec
To display one device that accepts the request and another device that does not respond to the request:
switch:admin> fcping 0x020800 22:00:00:04:cf:75:63:85
Source:
Destination:
Zone Check:
Pinging 0x20800 with 12 bytes of data:
received reply from 0x20800: 12 bytes time:1159 usec
received reply from 0x20800: 12 bytes time:1006 usec
received reply from 0x20800: 12 bytes time:1008 usec
received reply from 0x20800: 12 bytes time:1038 usec
received reply from 0x20800: 12 bytes time:1010 usec
5 frames sent, 5 frames received, 0 frames rejected, 0 frames timeout
Round-trip min/avg/max = 1006/1044/1159 usec
Pinging 22:00:00:04:cf:75:63:85 [0x217d9] with 12 bytes of data:
Request timed out
Request timed out
Request timed out
Request timed out
Request timed out
5 frames sent, 0 frames received, 0 frames rejected, 5 frames timeout
Round-trip min/avg/max = 0/0/0 usec
See Also gettimeofday, ping
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
Specifies quiet output. Only the zoning information and the summary line display
on program termination.
Specifies the source port ID, port WWN, or node WWN.
Specifies the destination port ID, port WWN, or node WWN.
10:00:00:00:c9:29:0e:c4
21:00:00:20:37:25:ad:05
Not Zoned
0x20800
22:00:00:04:cf:75:63:85
Zoned
2
fcPing
2-183