Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 766

Note: Enter commands in lowercase only; mixed case is for readability.
2
zone
Examples
To copy all zone configurations from the root zone database (AD0) to the current Admin Domain:
switch:admin> zone --copy AD0
To copy cur_cfg1 zone configuration from the root zone database (AD0) to the current Admin Domain:
switch:admin> zone --copy AD0.cur_cfg1
To copy backup_zn zone from the root zone database (AD0) to the current Admin Domain:
switch:admin> zone --copy AD0.backup_zn
To copy backup_zn zone from the root zone database (AD0) to the current Admin Domain, with Admin
Domain member list filtering:
switch:admin> zone --copy -f AD0.backup_zn
2-732
following:
• The device is not online.
• The device is online but is not Admin Domain-aware.
• The device is online but it is not part of the current Admin Domain.
• If a switch is specified using D,P in the Admin Domain membership list, all
zone elements specified with WWNs associated to that D,P are considered for
zone enforcement. If a device WWN is specified in the Admin Domain
member list, the corresponding D,P the device WWN is not considered for
zone enforcement. The zone database used as input to this command is
specified using mode. If the optional zone object name is specified, the
validation is completed on that zone object alone; otherwise, all zones in the
zone database are validated. Valid options for --validate are:
Note
If a zone member is specified using <D,P> in the Admin Domain membership list,
all zone elements specified with WWNs hanging off of that <D,P> will be
considered for zone enforcement. If a device WWN is specified in the Admin
Domain member list, the corresponding <D,P> (in other words, the device the
specified WWN is hanging off of) will NOT be considered for zone enforcement).
• zone_object
Specifies a zone object. A zone object can be a zone member, zone alias or a
zone.
• -f mode
If no mode options are given, the validated output of all the three buffers is
displayed. Valid mode flag values:
0 Uses the zone database from the current transaction buffer.
1 Uses the zone database stored in the persistent storage.
2 Uses the currently enforced zone database. This is the assumed default
mode flag value if no mode flag is specified.
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01