Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 376

Note: Enter commands in lowercase only; mixed case is for readability.
2
miniCycle
-ports itemlist
Examples To run a functional test on slot 1 using external (SERDES) loopback:
switch:admin> minicycle --slot 1 -lb_mode 2
Running minicycle ..............
One moment please ...
Path 0 ... Spinning ...
Path 1 ... Spinning ...
Path 2 ... Spinning ...
Path 3 ... Spinning ...
Path 4 ... Spinning ...
Path 5 ... Spinning ...
Path 6 ... Spinning ...
Path 7 ... Spinning ...
Test Complete: minicycle Pass 1 of 1
Duration 0 hr, 1 min & 4 sec (0:1:4:409).
passed.
2-342
The exact operation of modes 5 through 8 depends on the loopback mode selected.
When speed modes 5 through 8 are used with cables, they must be connected
EVEN->ODD or the test fails.
0 Run test at 1 Gbit/sec, 2 Gbit/sec, and 4 Gbit/sec (default).
1 Set all port speeds to lock at 1 Gbit/sec.
2 Set all port speeds to lock at 2 Gbit/sec.
4 Set all port speeds to lock at 4 Gbit/sec.
For -lb_mode set to 1, the following speed modes are available to test the speed
negotiation.
3 Set all even ports' speed for auto-negotiate. Set all odd ports' speed for 1
Gbit/sec.
4 Set all even ports' speed for auto-negotiate. Set all odd ports' speed for 2
Gbit/sec.
5 Set all odd ports' speed for auto-negotiate. Set all even ports' speed for 1
Gbit/sec.
6 Set all odd ports' speed for auto-negotiate. Set all even ports' speed for 2
Gbit/sec.
For -lb_mode set to 2, the following speed modes are available to test FIFO
underrun.
3,5 Set all even ports' speed for 2 Gbit/sec. Set all odd ports' speed for 1 Gbit/
sec.
4,6 Set all even ports' speed for 1 Gbit/sec. Set all odd ports' speed for 2 Gbit/
sec.
Specifies a list of blade ports to test. By default, all the blade ports in the specified
slot (--slot) are used. Refer to itemlist for further details. If all ports in the ASIC
pair are not specified, only paths between selected ports are tested.
ASIC-pair 0: -ports 0-15
ASIC-pair 1: -ports 16-31
ASIC-pair 2: -ports 32-47
ASIC-pair 3: -ports 48-63
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01