Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 101

Note: Enter commands in lowercase only; mixed case is for readability.
mode
Examples
To display all zone configurations that start with "Test":
switch:admin> cfgshow "Test*"
cfg:
cfg:
To display all zone configuration information:
switch:admin> cfgshow
Defined configuration:
cfg:
cfg:
zone:
zone:
alias: array1
alias: array2
alias: loop1
Effective configuration:
cfg:
zone:
zone:
To display only configuration names:
switch:admin> cfgshow "*"
cfg:
cfg:
See Also
cfgAdd, cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave,
cfgTransAbort,
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
Specify 0 to display the contents of the transaction buffer (the contents of the
current transaction) or specify 1 to display the contents of nonvolatile memory.
The default value is 0. This operand is optional.
Test1 Blue_zone
Test_cfg Red_zone; Blue_zone
USA1 Blue_zone
USA_cfg Red_zone; Blue_zone
Blue_zone
1,1; array1; 1,2; array2
Red_zone
1,0; loop1
21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02
21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28
21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df
USA_cfg
Blue_zone
1,1
21:00:00:20:37:0c:76:8c
21:00:00:20:37:0c:71:02
1,2
21:00:00:20:37:0c:76:22
21:00:00:20:37:0c:76:28
Red_zone
1,0
21:00:00:20:37:0c:76:85
21:00:00:20:37:0c:71:df
USA1 Blue_zone
USA_cfg Red_zone; Blue_zone
cfgTransShow
2
cfgShow
2-67