Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 128

Note: Enter commands in lowercase only; mixed case is for readability.
2
configUpload
It has variables such as the switch's name and IP address.
The[License] section contains license strings.
The[Chassis Configuration] and [Configuration] sections contain general switch configuration variables,
such as diagnostic settings, fabric configuration settings, and SNMP settings.
The[Zoning] section contains the zoning configuration.
The[AD-Headers] section contains the Admin Domain headers configuration.
The[Defined Security policies] section contains the Defined Security Policies.
The[Active Security policies] section contains the Active Security Policies.
The[FICU Saved Files] section contains the FICON CUP related configuration parameters.
The[fcRouting] section contains the Fibre Channel Router configuration.
The[iSCSI] section contains the iSCSI configuration.
The[Banner] section contains the banner header information.
For Admin Domain users, please refer to the Fabric OS Administrator's Guide for details regarding
configUpload
Note
To be able to mention the FTP server by name, you must setup one or more DNS servers with the
dnsConfig
Note
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands
This command has the following operands:
-p ftp or -p scp
"host"
"user"
"file"
"passwd"
Note
No spaces are allowed between operands, nor can any of the above operands contain the double-quote
character, both in command-line mode nor the interactive mode.
2-94
and configDownload behavior.
command.
Specifies the use of the FTP or SCP protocol. If a protocol is not specified, FTP is
the default.
Specifies a host name or IP address in quotation marks: for example, "citadel" or
"192.168.1.48". The configuration file is downloaded from this host.
Specifies the user name, in quotation marks: for example, "jdoe". This user name
is used to gain access to the host system.
Specifies the file name, in quotation marks: for example, "config.txt". Absolute
path names may be specified using a forward slash (
for the file in the user's home directory on UNIX hosts and in the directory on
which the FTP server is running on Windows hosts.
Specifies the password for the FTP login.
). Relative path names search
/
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01