Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 751

Note: Enter commands in lowercase only; mixed case is for readability.
-nonstop mode
-ports itemlist
Examples To run the
switch:admin> txdpath
Running TX Data Path Test ....
Test Complete: "txdpath" Pass 10 of 10
Duration 0 hr, 0 min & 47 sec (0:0:47:645).
Diagnostics
When it detects failure(s), the test can report one or more of the following error messages:
DATA
ERRSTAT
INIT
PORTDIED
STATS
TIMEOUT
XMIT
Refer to the Fabric OS Message Reference for more information.
See Also
backport, camTest, centralMemoryTest, cmemRetentionTest, cmiTest, crossPortTest, itemList,
portLoopbackTest, portRegTest, spinSilk,
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
Specify nonstop mode. If set to a nonzero value, the test does not stop on the first
error. The default value is 0.
Specify a list of user ports to test. By default, all of the user ports in the current
switch are tested. This option can be used to restrict testing to the specified ports.
txdPath test:
sramRetentionTest
2
txdPath
2-717