Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 43

Note: Enter commands in lowercase only; mixed case is for readability.
--transabort
--transshow
Examples To enable AD5:
switch:admin> ad --activate 5
You are about to activate a new admin domain.
Do you want to activate '5' admin domain (yes, y, no, n): [no] y
To enable AD_13:
switch:admin> ad --activate AD_13
To add new device members:
switch:admin> ad --add AD1, -d "100,5; 4,1"
To apply all changes to the Admin Domain configurations (from the last time --apply was executed):
switch:admin> ad --apply
You are about to enforce the saved AD configuration.
This action will trigger ad --apply to all switches in the fabric.
Do you want to apply all admin domains (yes, y, no, n): [no] y
To clear all Admin Domain definitions:
switch:admin> ad --clear
You are about to delete all ADs definitions.
This operation will fail if zone configurations exists in AD1-AD254
Do you want to clear all admin domains (yes, y, no, n): [no] y
To create an Admin Domain with a mix of D,PI, WWNs, and zone alias device members (two different
methods shown):
switch admin> ad --create "AD1", -d "100,5; 1,3; 20:00:00:e0:8b:05:4d:05"
switch admin> ad --create 1, -d "100,5; 1,3; 21:00:00:e0:8b:05:4d:05"
To create an Admin Domain with a switch list (specified using domain ID and switch WWN):
switch:admin> ad --create "AD1", -s "100; 10:00:00:60:69:80:59:13"
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
Domain aware members. All FC Router imported devices in the AD device list
will be marked as AD-aware members.
Note
Note: ad --show and ad --validate may return incorrect information about switch
port members for non-AD aware switches running pre-v3.2 Fabric OS. This is
because pre-v3.2 Fabric OS does not support Exchange Service Support (ESS),
and therefore the Name Server cannot get the correct port range of such switches.
Aborts the transaction buffer.
aborting the transaction.
Displays the ID of the current Admin Domain transaction. It also provides
information about whether the transaction can be aborted. The transaction cannot
be aborted if it is an internal Admin Domain transaction.
ad --transabort prompts for confirmation before
2
ad
2-9