Note: Enter commands in lowercase only; mixed case is for readability.
--radiusonly
--radiuslocal
--radiuslocalbackup Enable the current RADIUS configuration as the primary AAA service and the
Examples
To display the current RADIUS configuration:
sw:admin> aaaconfig --show
Position
1
2
3
Primary AAA Service: Switch database
Secondary AAA Service: None
To change the configuration for server 192.168.233.48:
switch:admin> aaaconfig --change 192.168.233.48 -p 3002 -s newsecret -t 1
See Also
none
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
Enable authentication via the RADIUS configuration only. This is used to select
the RADIUS configuration as the primary AAA service. To enable a RADIUS
configuration, as least one server must exist in the configuration.
Enable the current RADIUS configuration as the primary AAA service and the
switch-local database as the secondary AAA service. When enabled, if RADIUS
authentication fails, the switch-local database will be accessed for AAA services.
switch local database as the backup AAA service. When enabled, if RADIUS
authentication fails, requests for AAA services are denied. If the RADIUS server
times out, requests are sent to the switch-local database.
ServerPortSecret
192.168.233.48
1812
sharedsecret 3
192.168.233.44
1812
sharedsecret 3
radserver
1812
private
Timeout(s)
Auth-Protocol
CHAP
CHAP
5 CHAP
2
aaaConfig
2-3