Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 655

Note: Enter commands in lowercase only; mixed case is for readability.
-ports itemlist
-passcnt count
Refer to
Examples
To test the serial link of the following port path:
switch:admin> sltest -ports 0/5-0/31 -speed 4 -lb_mode 1 passcnt 1
Running Port sltest ....
passed.
Diagnostic
When it detects failures, the test might report one or more of the following error messages:
DATA
ERRSTAT
INIT
STATS
TIMEOUT
See Also cmemRetentionTest, crossPortTest, itemList, portRegTest,
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
Specifies a list of blade ports to test. By default, all the blade ports in the specified
slot (--slot) is used.
Specifies the number of test repetitions. By default, the test runs once.
itemList for further details.
slTest
spinSilk
2
2-621