Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 744

Note: Enter commands in lowercase only; mixed case is for readability.
2
tsClockServer
Examples
To display the current clock server value (LOCL), set the value to an NTP server at the specified IP
address and then verify that the new IP address was saved:
switch:admin> tsclockserver
LOCL
switch:admin> tsclockserver "123.123.123.123"
Updating Clock Server configuration...done.
switch:admin> tsclockserver
123.123.123.123
See Also date
2-710 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01