Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 601

Note: Enter commands in lowercase only; mixed case is for readability.
To enable secure mode using --quickmode:
fcsprimary:admin> secmodeenable --quickmode
Your
installed on this equipment is subject to the End User License Agreement
provided
which you may review at http://www.switchkeyactivation.com/cps. By using
these security features, you are consenting to be bound by the
these
promptly contact the entity from which you obtained this software and do
not use these security features.
Do you agree to these terms?
This command requires Switch Certificate,
license to be installed on
PLEASE NOTE: On successful completion of this command, login sessions
may be closed and some switches may go through a reboot to form a secure
fabric.
Non-FCS admin password will be set the same as FCS admin password.
ARE YOU SURE
Please enter current admin account password:
Secure mode is enabled.
To enable secure mode using --currentpwd --fcs "*":
fcsprimary:admin> secmodeenable --currentpwd --fcs "*"
Your
installed on this equipment is subject to the End User License Agreement provided
with the equipment and the Certification
at http://www.switchkeyactivation.com/cps. By using
these security features, you are consenting to be bound by the
documents.
promptly contact the entity from which you obtained this software and do
not use these security features.
Do you agree to these terms?
This command requires Switch Certificate,
license to be installed on
PLEASE NOTE: On successful completion of this command, login sessions
may be closed and some switches may go through a reboot to form a secure
fabric.
Non-FCS admin password will be set the same as FCS admin password.
ARE YOU SURE
Please enter current admin account password:
Secure mode is enabled.
See Also secFabricShow, secModeDisable, secModeShow, secPolicyShow,
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
use of the certificate-based
with the equipment and the Certification
documents. If you do not agree to the terms of these documents,
every switch in the fabric.
(yes, y, no, n): [no] y
use of the certificate-based
If you do not agree to the terms of these documents,
every switch in the fabric.
(yes, y, no, n): [no] y
security features
Practices Statement,
(yes, y, no, n): [no] y
Security license and Zoning
security features
Practices Statement, which you may review
(yes, y, no, n): [no] y
Security license and Zoning
secModeEnable
of the software
terms of
of the software
terms of these
userRename
2
2-567