Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 136

Note: Enter commands in lowercase only; mixed case is for readability.
2
configure
Application Attributes
Application HTTP, SNMP, and RPCd attributes are configurable; by default, all three attributes are
enabled. Refer to the table for the application attributes that can be changed.
Table 2-9
Application
ssl
http
snmp
rpcd
cfgload
Note
The secure protocols must not be enabled before setting SSL attributes correctly.
Operands
none
2-102
Configurable Application Attributes
File
Certificate File
CA Certificate File
Length of crypto key
HTTP Enabled
Secure HTTP Enabled
SNMP Security Level
RPCd Enabled
Secure RPCd Callback
Secure Config Upload and Download
Type Default Range
string not set varies
string not set varies
number 128 40, 56, 128
boolean Yes Yes/No
boolean Off On/Off
number 0 0, 1, 2
boolean On On/Off
boolean Off On/Off
boolean Off On/Off
Fabric OS Command Reference Manual
Publication Number: 53-1000240-01