Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Command Reference Manual page 214

Note: Enter commands in lowercase only; mixed case is for readability.
2
fcipPathTest
Examples
To run the test on slot 2 with PHY loopback sending 10 frames:
switch:admin> fcippathtest --slot 2 -path 2 -nframes 10
Running fcippathtest ..............
Test Complete: fcippathtest Pass 10 of 10
Duration 0 hr, 1 min & 50 sec (0:1:50:942).
passed.
Diagnostics When a failure is detected, the test might report one or more of the following:
• PATH_TEST_ERR
• PATH_TEST_CHIP_INIT_ERR
• PATH_TEST_IMAGE_ERR
• PATH_TEST_TIMEOUT_ERR
• PATH_TEST_HEARTBEAT_ERR
• PATH_TEST_INVALID_RESULT
• PATH_TEST_GE_PORT_ENABLE_ERR
• PATH_TEST_GE_PORT_DISABLE_ERR
See Also fcipChipTest
2-180 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01