Show Radius - D-Link DGS-3000 Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3000-26TC:admin#config radius 1 auth_port 60
Command: config radius 1 auth_port 60
Success.
DGS-3000-26TC:admin#
70-4

show radius

Description
This command is used to display RADIUS server configurations.
Format
show radius
Parameters
None.
Restrictions
None.
Example
To display RADIUS server configurations:
DGS-3000-26TC:admin#show radius
Command: show radius
Index IP Address
----- --------------- --------- --------- ------- ---------- ----------------
1 10.48.74.121
Total Entries : 1
DGS-3000-26TC:admin#
70-5 show auth_client
Description
This command is used to display information of RADIUS authentication client.
Format
show auth_client
Auth-Port Acct-Port Timeout Retransmit Key
60 1813
704
(sec)
5 2 dlink