Authorization Network Radius; Show Radius - D-Link DWL-8500AP Command Reference Manual

no radius server timeout
This command sets the timeout value to the default value.
Format
Mode

authorization network radius

Use this command to allow the switch to accept VLAN assignment by the RADIUS server.
Default
Format
Mode
no authorization network radius
Use this command to prohibit the switch from accepting VLAN assignment by the RADIUS
server.
Format
Mode

show radius

This command is used to display the various RADIUS configuration items for the switch as
well as the configured RADIUS servers. If the optional token 'servers' is not included, the
following RADIUS configuration items are displayed.
Format
Mode
Primary Server IP Address The configured server currently in use for authentication.
Number of configured servers The configured IP address of the authentication server.
Max number of retransmits The configured value of the maximum number of times a
Timeout Duration The configured timeout value, in seconds, for request re-transmissions.
Accounting Mode Yes or No.
If you use the
[servers]
IP Address
Port
Type
Secret Configured Yes / No.
Message Authenticator The message authenticator attribute for the selected server, which
no radius server timeout
Global Config
disabled
authorization network radius
Global Config
authorization network radius
Global Config
show radius [servers]
Privileged EXEC
request packet is retransmitted.
keyword, the following information displays:
IP address of the configured RADIUS server.
The port in use by this server.
Primary or secondary.
can be enables or disables.
7 Management Commands
RADIUS Commands 321