Pvid Auto Assign Settings; Voice Vlan; Voice Vlan Global Settings - D-Link xStack Reference Manual

xStack® DGS-3120 Series Layer 2 Stackable Managed Switch Web UI Reference Guide

PVID Auto Assign Settings

Users can enable or disable PVID Auto Assign Status. The default setting is enabled.
To view the following window, click L2 Features > VLAN > PVID Auto Assign Settings, as show below:
Click the Apply button to accept the changes made.

Voice VLAN

Voice VLAN Global Settings

Voice VLAN is a VLAN used to carry voice traffic from IP phone. Because the sound quality of an IP phone call will be
deteriorated if the data is unevenly sent, the quality of service (QoS) for voice traffic shall be configured to ensure the
transmission priority of voice packet is higher than normal traffic.
The switches determine whether a received packet is a voice packet by checking its source MAC address. If the
source MAC addresses of packets comply with the organizationally unique identifier (OUI) addresses configured by the
system, the packets are determined as voice packets and transmitted in voice VLAN.
To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN Global Settings, as show
below:
The fields that can be configured are described below:
Parameter
Voice VLAN State
Voice VLAN Name
Voice VID
Priority
Figure 4-16 PVID Auto Assign Settings window
Figure 4-17 Voice VLAN Global Settings window
Description
The state of the voice VLAN.
The name of the voice VLAN.
The VLAN ID of the voice VLAN.
The priority of the voice VLAN, the range is 0 – 7. The default priority is 5.
74