Chapter 17 Command Logging Commands - D-Link xstack DGS-3620 series Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Chapter 17
Commands
enable command logging
disable command logging
show command logging
17-1 enable command logging
Description
The enable command logging command is used to enable the command logging function.
Note: When the switch is under the booting procedure and the procedure of downloading the
configuration to execute immediately, all configuration commands should not be logged. When the
user is under AAA authentication, the user name should not changed if user uses "enable admin"
command to replace its privilege.
Format
enable command logging
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable the command logging function:
DGS-3620-28PC:admin# enable command logging
Command: enable command logging
Success.
DGS-3620-28PC:admin#
17-2 disable command logging
Description
The disable command logging command is used to disable the command logging function.
Command Logging
271