Table 67: Show Secure Classifier-List Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

Meaning
Copyright © 2010, Juniper Networks, Inc.
host1#show secure classifier-list
Secure IP secClassA.1 ip any any
Secure IP secClassB.1 ip any not 10.10.10.1 255.255.255.255
Secure IP secClass25.1 user-packet-class 8 source-route-class 100 ip
192.168.44.103 255.255.255.255 any
Displays details of each secure CLACL
host1#show secure classifier-list secClass25 detailed
Secure IP Classifier Control List secClass25
Reference count:
Entry count:
Classifier-List secClass25 Entry 1
User Packet Class:
Source Route Class:
Protocol:
Not Protocol:
Source IP Address:
Source IP WildcardMask:
Not Source Ip Address:
Destination IP Address:
Destination IP WildcardMask:255.255.255.255
Not Destination Ip Address: false
Table 67 on page 265 lists show secure classifier-list command output fields.

Table 67: show secure classifier-list Output Fields

Field Name
Reference count
Entry count
Classifier-List
Entry
Color
Protocol
Not Protocol
Source IP Address
Source IP WildcardMask
Classifier Control List Table
---------- ------- ---- -----
Classifier Control List Table
---------- ------- ---- -----
0
1
8
100
ip
false
192.168.44.103
255.255.255.255
false
0.0.0.0
Field Description
Number of times the CLACL is referenced by policies
Number of entries in the classifier list
Name of the classifier list
Entry number of the classifier list rule
Packet color to match: green, yellow, or red
Protocol type
If true, matches any protocol except the preceding protocol;
if false, matches the preceding protocol
Address of the network or host from which the packet is
sent
Mask that indicates addresses to be matched when specific
bits are set
Chapter 14: Monitoring Packet Mirroring
265