Additional Packet-Mirroring Traps For Calea Compliance - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

Additional Packet-Mirroring Traps for CALEA Compliance

Copyright © 2010, Juniper Networks, Inc.
Table 58: Packet-Mirroring SNMP Traps (continued)
Trap Information Sent Event That Triggers the Trap
A secure policy
failed during
CoA-based or
RADIUS-initiated
packet mirroring
Configuration source
Date and time of event –
Error cause
Error string
Mirror ID
Mirroring direction –
Secure policy name –
Secure policy UID –
Session ID
Trigger event
Trigger type
Username
Virtual router (0 for
L2TP)
You can use the packet-mirroring traps shown in Table 59 on page 252 to help support
compliance with the Communications Assistance for Law Enforcement Act (CALEA),
which defines electronic surveillance guidelines for telecommunications companies. For
example, a third-party vendor of mediation devices might receive packet mirroring traps
from the router and convert the traps to messages that comply with CALEA, such as
Lawfully Authorized Electronic Surveillance (LAES) for IP Network Access, American
Nation Standard For Telecommunications messages. Individual traps might map to
multiple LAES messages to provide additional compliance-related information.
Chapter 13: Managing Packet Mirroring
A secure
policy failed
during CLI An interface
trigger or with secure
CLI-based policies
packet attached is
mirroring deleted
–
–
–
–
–
– –
An analyzer
is
unreachable
–
–
–
–
–
–
–
–
–
–
–
251