Figure 11: Wholesale L2Tp Configuration - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

JunosE 11.3.x Policy Management Configuration Guide
136
IP_RATE, Committed Rate:1 Mbps
Peak Rate: 11 Mbps
Committed Action: transmit unconditional
Conformed Action: transmit conditional
Exceeded Action: drop
At I3—L2TP_RATE:
Committed Rate: 10 Mbps
Peak Rate: 0 Mbps
Committed Action: transmit unconditional
Conformed Action: drop
Exceeded Action: drop
Policers at I1, I2, and I3 feed into a single policer that has the following configuration:
VLAN_RATE, Committed Rate: 12 Mbps
Peak Rate: 0 Mbps
Committed Action: transmit final
Conformed Action: drop
Exceeded Action: drop
IP policy USER_POL1 is attached as input to I1, IP policy USER_POL2 is attached as
input to I2, and L2TP policy USER_POL3 is attached as input to I3.
Policer instance VLAN_RATE is shared across all three instances of EPG1.

Figure 11: Wholesale L2TP Configuration

Create a rate-limit that can be shared across all forwarding interfaces. Create an
1.
external parent group to hold this rate limit.
host1(config)#rate-limit-profile VLAN_RATE two-rate hierarchical
host1(config-rate-limit-profile)#committed-rate 12000000
host1(config-rate-limit-profile)#committed-action transmit final
Copyright © 2010, Juniper Networks, Inc.