Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 42

JunosE 11.3.x Policy Management Configuration Guide
Related
Documentation
18
Assigned profile (IP)
Assigned profile (BridgedEnet): none assigned
Assigned profile (PPP)
Assigned profile (PPPoE)
Assigned profile (any)
SNMP trap link-status: disabled
InPackets:
InBytes:
OutPackets:
OutBytes:
InErrors:
OutErrors:
InPacketDiscards:
InPacketsUnknownProtocol: 0
OutDiscards:
ATM policy input polUbr
Statistics are disabled
1 interface(s) found
host1#show atm subinterface atm 0/0.101
Interface ATM-Prot VCD VPI VCI
----------- -------- --- --- --- ------- ----- ---- ------ ---------
ATM 0/0.101 RFC-1483 101
Auto configure status
Auto configure interface(s)
Detected 1483 encapsulation
Detected dynamic interface
Interface types in lockout
Assigned profile (IP)
Assigned profile (BridgedEnet): none assigned
Assigned profile (PPP)
Assigned profile (PPPoE)
Assigned profile (any)
SNMP trap link-status: disabled
InPackets:
InBytes:
OutPackets:
OutBytes:
InErrors:
OutErrors:
InPacketDiscards:
InPacketsUnknownProtocol: 0
OutDiscards:
ATM policy input polCbr
classifier-group *
3096 packets, 377678 bytes
traffic-class best-effort
color green
1 interface(s) found
atm policy-list
: none assigned
: none assigned
: none assigned
: none assigned
0
0
0
0
0
0
0
0
Circuit
Type Encap MTU
0 101 PVC SNAP 9180 up
: static
: none
: none
: none
: none
: none assigned
: none assigned
: none assigned
: none assigned
0
0
0
0
0
0
0
0
Copyright © 2010, Juniper Networks, Inc.
Interface
Status Type
Static