Packet Mirroring Trap Severity Levels; Table 59: Packet-Mirroring Traps For Calea Compliance; Table 60: Packet Mirroring Trap Severity Levels - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

JunosE 11.3.x Policy Management Configuration Guide

Packet Mirroring Trap Severity Levels

252

Table 59: Packet-Mirroring Traps for CALEA Compliance

Trap
juniPacketMirrorSessionStart
juniPacketMirrorSessionEnd
juniPacketMirrorInterfaceSessionActivated
juniPacketMirrorInterfaceSessionDeactivated
juniPacketMirrorSessionReject
juniPacketMirrorSessionFailed
Table 60 on page 252 lists the default severity levels for packet mirroring traps. See the
JunosE System Basics Configuration Guide for descriptions of the severity levels.

Table 60: Packet Mirroring Trap Severity Levels

Trap
juniPacketMirrorAnalyzerUnreachable
juniPacketMirrorCliTriggerBasedMirroringFailure
juniPacketMirrorInterfaceDeleted
juniPacketMirrorInterfaceSessionActivated
juniPacketMirrorInterfaceSessionDeactivated
juniPacketMirrorRadiusBasedMirroringFailure
juniPacketMirrorSessionEnd
juniPacketMirrorSessionFailed
juniPacketMirrorSessionStart
Description
A grant has been issued to a mirrored subscriber.
A mirrored session has been terminated; includes
the termination reason.
A secure policy has been attached to an existing
interface or to an existing session.
A secure policy has been detached from an
interface, not including interface or session
termination.
A deny has been issued because the potential
mirrored user was not allowed on the network
for some reason. However, the user would have
been mirrored if access to the network had been
allowed.
The user session was terminated before the
secure policy was attached. For example, no
resources were available to create the interface.
The termination reason is included.
Default Severity Level
Warning
Error
Notice
Info
Info
Error
Info
Info
Info
Copyright © 2010, Juniper Networks, Inc.