Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 50

JunosE 11.3.x Policy Management Configuration Guide
Related
Documentation
26
host1(config-policy-list-classifier-group)#mark-user-priority 7
Exit to Policy List Configuration mode, then add traffic class rules for packets that
6.
conform to different CLACLs.
host1(config-policy-list-classifier-group)#exit
host1(config-policy-list)#classifier-group lowLatency
host1(config-policy-list-classifier-group)#traffic-class lowLatency
host1(config-policy-list-classifier-group)#exit
host1(config-policy-list)#classifier-group excellentEffort
host1(config-policy-list-classifier-group)#traffic-class excellentEffort
host1(config-policy-list-classifier-group)#exit
host1(config-policy-list)#classifier-group bestEffort
host1(config-policy-list-classifier-group)#traffic-class bestEffort
Exit Policy List Configuration mode to save the configuration.
7.
host1(config-policy-list-classifier-group)#exit
host1(config-policy-list)#exit
host1(config)#
Display the policy list.
8.
host1#show policy-list routeForVlan
VLAN Policy routeForVlan
Administrative state: enable
Reference count:
Classifier control list: lowLatencyLowDrop, precedence 100
traffic-class lowLatencyLowDrop
color green
mark-user-priority 7
Classifier control list: lowLatency, precedence 100
traffic-class lowLatency
Classifier control list: excellentEffort, precedence 100
traffic-class excellentEffort
Classifier control list: bestEffort, precedence 100
traffic-class bestEffort
vlan policy-list
Policy Table
------ -----
0
Copyright © 2010, Juniper Networks, Inc.