Ip Classifiers And Size Limits; Table 19: Size Limit Of Individual Ip Classifiers - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

JunosE 11.3.x Policy Management Configuration Guide

IP Classifiers and Size Limits

156
entry size required to be 352 bits. Some of the mutually exclusive classification fields
share the same classifier entry location, while a few other smaller fields are combined
to form a single larger classifier field.
NOTE: Range vector hardware classifiers on line modules supported full IPv6
classification even in JunosE releases earlier than Release 10.2.x.
Table 19 on page 156 lists all IP classifiers and the size limit of each classifier entry.

Table 19: Size Limit of Individual IP Classifiers

IP Classifier
Color
Destination address
Destination port
Destination route class
ICMP type
ICMP code
IGMP type
IP flags
IP fragmentation
Local
Protocol
Source address
Source port
Source route class
TCP flags
ToS
Traffic class
User packet class
Size Limit (Bits)
2
32
16
8
8
8
8
3
2
1
8
32
16
8
6
8
3
4
Copyright © 2010, Juniper Networks, Inc.