Monitoring Rate-Limit Profiles; Table 43: Show Policy-Parameter Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

Meaning
Related
Documentation

Monitoring Rate-Limit Profiles

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
Referenced by rate-limit profiles: 5 references
rlpData
rlpVoice
rlpVideo
Policy Parameter otherRate
reference-rate: 65536
Reference count: 3
Referenced by interfaces: 1 references
IP interface ATM5/0.2: 100000
Referenced by rate-limit profiles: 2 references
rlpOther
Table 43 on page 203 lists the show policy-parameter command output fields.

Table 43: show policy-parameter Output Fields

Field Name
Type
Reference count
Aggregation node
Referenced by interfaces
Referenced by profiles
Referenced by policies
Referenced by parent groups
show policy-parameter
Display information about rate-limit profiles.
To display information about rate-limit profiles:
host1#show rate-limit-profile
IP Rate-Limit-Profile: rlp
Profile Type:
Reference count:
Committed rate:
Committed burst:
Excess burst:
Mask:
Committed rate action:
Chapter 9: Monitoring Policy Management
Field Description
Type of parameter, such as hierarchical.
Number of references in policy, interface, and
external parent group profiles.
Aggregation node value.
List of interfaces where parameter is referenced.
List of profiles where parameter is referenced
List of policies where parameter is referenced.
List of external parent groups where parameter
is referenced.
Rate Limit Profile Table
---- ----- ------- -----
one-rate
0
0
8192
0
255
transmit
203