JunosE 11.3.x Policy Management Configuration Guide
Related
Documentation
266
Table 67: show secure classifier-list Output Fields (continued)
Field Name
Not Source Ip Address
Destination IP Address
Destination IP WildcardMask
Not Destination Ip Address
Traffic Class
User Packet Class
DS Field
TOS Byte
Precedence
User Priority bits
Traffic Class Field
EXP Bits
EXP Mask
DE Bit
Destination Route Class
Source Route Class
Local
show secure classifier-list
Field Description
If true, matches any source IP address and mask except the
preceding source IP address and mask; if false, matches
the preceding source IP address and mask
Number of the network or host from which the packet is
sent
Mask that indicates addresses to be matched when specific
bits are set
If true, matches any destination IP address and mask except
the preceding destination IP address and mask; if false,
matches the preceding destination IP address and mask
Name of the traffic class to match
User packet value to match
DS field value to match
ToS value to match
Precedence value to match
User priority bits value to match
Traffic class field value to match
MPLS EXP bit value to match
Mask applied to EXP bits before matching
Frame Relay DE bit value to match5.2.0b1 ID-1381
Route class used to classify packets based on the packet's
destination address
Route class used to classify packets based on the packet's
source address
If true, matches packets destined to a local interface; if false,
matches packets that are traversing the router
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 and is the answer not in the manual?