Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 38

JunosE 11.3.x Policy Management Configuration Guide
Related
Documentation
14
host1(config)#vlan classifier-list bestEffort user-priority 1
host1(config)#vlan classifier-list bestEffort user-priority 0
NOTE: You cannot configure classifier control lists (CLACLs) for policy
lists to be attached to VLAN interfaces, without specifying the criteria by
which the router defines a packet flow. Although the carriage return, <cr>,
option is displayed when you type a question mark (?) after entering the
vlan classifier list classiferName command without defining any other
keyword or CLACL criterion, an error message is displayed when you press
Enter to configure the VLAN CLACL with only the name. You must specify
at least one criterion for the VLAN CLACL to be successfully configured.
vlan classifier-list
Copyright © 2010, Juniper Networks, Inc.