Monitoring Policy List Parameters - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

JunosE 11.3.x Policy Management Configuration Guide
Related
Documentation

Monitoring Policy List Parameters

Purpose
Action
202
Table 42: show policy-list Output Fields (continued)
Field Name
mark DE
Rule status
show policy-list
Display information about policy list parameters.
To display policy list information for a hierarchical policy:
host1#show policy-parameter
Policy Parameter hierGroup1
Type: hierarchical
Reference count: 8
Aggregation node: vlan
Referenced by interfaces: 2 references
IP ATM5/0.1: atm-vc
IP ATM5/0.2: 5
Referenced by profiles: 1 references
profile1
Referenced by policies: 5 references
policy1
policy2
policy3
Policy Parameter hierGroup2
Type: hierarchical
Reference count: 3
Aggregation node: 3
Referenced by interfaces: 1 references
IP ATM5/0.2: atm-vp 1
Referenced by policies: 2 references
policy1
Referenced by parent groups: 1 references
extPg1
To display list information:
host1(config)#show policy-parameter
Policy Parameter refRlpRate
Type: reference-rate
Rate: 100000
Reference count: 7
Referenced by interfaces: 2 references
IP interface ATM5/0.1: 1000000
IP interface ATM5/0.2: 200000
Field Description
DE bit action
Indicates whether the rule is suspended.
Policy Parameter Table
------ --------- -----
Copyright © 2010, Juniper Networks, Inc.