Monitoring Cli-Based Packet Mirroring - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual
Software for e series broadband services routers policy management configuration guide
Hide thumbs
Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04:
- Reference manual (284 pages) ,
- Configuration manual (632 pages)
Table of Contents
Advertisement
JunosE 11.3.x Policy Management Configuration Guide
Monitoring CLI-Based Packet Mirroring
Purpose
Action
258
Display brief or default (normal) information about your CLI-based packet mirroring
environment, including interface analyzer information. To display secure packet mirroring
information you must enable the mirror-enable command before using this command.
This command displays a maximum of two secure policy attachments and statistics, if
configured.
To display the default (normal) format for a specific interface, which is used as the default
analyzer interface:
host1#show ip interface atm 5/0.1
ATM5/0.1 line protocol Atm1483 is up, ip is analyzer (default)
Network Protocols: IP
Internet address is 10.10.3.4/255.255.255.0
Broadcast address is 255.255.255.255
Operational MTU = 0
Administrative MTU = 0
Operational speed = 100000000
Discontinuity Time = 0
Router advertisement = disabled
Proxy Arp = disabled
Administrative debounce-time = disabled
Operational debounce-time
Access routing = disabled
Multipath mode = hashed
In Received Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Packets 0, Bytes 0
In Policed Packets 0, Bytes 0
In Error Packets 0
In Invalid Source Address Packets 0
In Discarded Packets 0
Out Forwarded Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Routed Packets 0, Bytes 0
Out Scheduler Dropped Packets 0, Bytes 0
Out Policed Packets 0, Bytes 0
Out Discarded Packets 0
To display the format for a specific interface, showing secure policy attachments:
host1#show ip interface atm 4/1.1
ATM5/0.1 line protocol Atm1483 is up
Network Protocols: IP
Internet address is 10.10.7.14/255.255.255.0
Broadcast address is 255.255.255.255
Operational MTU = 0
Administrative MTU = 0
Operational speed = 100000000
Discontinuity Time = 0
Router advertisement = disabled
Proxy Arp = disabled
Administrative debounce-time = disabled
Operational debounce-time
Access routing = disabled
Multipath mode = hashed
In Received Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Packets 0, Bytes 0
Administrative speed = 0
= disabled
Administrative speed = 0
= disabled
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
