Table 9: Ascend-Data-Filter Attribute For An Input Policy On An Ipv6 - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual
Software for e series broadband services routers policy management configuration guide
Hide thumbs
Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04:
- Reference manual (284 pages) ,
- Configuration manual (632 pages)
Table of Contents
Advertisement
Table 8: Ascend-Data-Filter Attribute for an Output Policy on an IPv6 Interface (continued)
Action or Classifier
Spare
Source IPv6 address
Destination IPv6 address
Source IPv6 prefix
Destination IPv6 prefix
Protocol
Established
Source port
Destination port
Source port qualifier
Destination port qualifier
Reserved
Table 9: Ascend-Data-Filter Attribute for an Input Policy on an IPv6 Interface
Action or Classifier
Type
Forward
Indirection
Spare
Source IPv6 address
Destination IPv6 address
Source IPv6 prefix
Copyright © 2010, Juniper Networks, Inc.
Hex Value
00
300182ab 102087ec 00000000
00000000
200182ab 102087ec 12340917
34150012
40
80
11
00
0000
0C12
00
02
0000
Table 9 on page 53 lists the values specified in the Ascend-Data-Filter2 attribute that
are used to create an input policy.
Hex Value
03
00
01
00
200182ab 102087ec 12340917 34150012
00000000 00000000 00000000
00000000
80
Chapter 4: Creating Classifier Groups and Policy Rules
Actual Value
None
3001:82ab:1020:87ec:
0000:0000:0000:0000
2001:82ab:1020:87ec:
1234:0917:3415:0012
64
128
UDP
None
None
3090
None
Equal to
None
Actual Value
IPv6
Filter
Ingress
None
2001:82ab:1020:87ec:1234:0917:3415:0012
Any
128
53
Advertisement
Table of Contents
