Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 54

JunosE 11.3.x Policy Management Configuration Guide
Table 4: Policy Rule Commands and Precedence (continued)
Frame
ATM Relay
– –
Related
Documentation
30
GRE IP
– log (not
supported on
ES2 10G
Uplink LM or
ES2 10G LM)
NOTE: The commands listed in this section replace the Policy List
Configuration mode versions of the commands. For example, the color
command replaces the Policy List Configuration mode version of the color
command. The original command may be removed completely in a future
release.
Classifier Groups and Policy Rules Overview on page 27
Monitoring Policy Management Overview on page 173
color
color-mark-profile
filter
green-mark
log
mark
mark-clp
mark-de
mark-exp
mark-user-priority
next-hop
next-interface
rate-limit-profile
red-mark
reference-rate
traffic-class
user-packet-class
yellow-mark
IPv6 L2TP
– –
Copyright © 2010, Juniper Networks, Inc.
MPLS VLAN
– –