Monitoring Secure Clacl Configurations - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

JunosE 11.3.x Policy Management Configuration Guide
Related
Documentation

Monitoring Secure CLACL Configurations

Purpose
Action
264
Table 66: show radius dynamic-request statistics Output
Fields (continued)
Field Name Field Description
Change of Status of change of authorization feature, enabled or disabled
Authorization
Secret Secret (key) used to connect to RADIUS server
Disconnect or CoA Number of RADIUS-initiated disconnect or CoA requests received
Requests
Disconnect or CoA Number of RADIUS-initiated disconnect or CoA requests accepted
Accepts
Disconnect or CoA Number of RADIUS-initiated disconnect or CoA requests rejected
Rejects
Disconnect or CoA Number of RADIUS-initiated disconnect or CoA messages rejected
No Session ID because the request did not include a session ID attribute
Disconnect or CoA Number of RADIUS-initiated disconnect or CoA messages rejected
Bad Authenticators because the calculated authenticator in the authenticator field of the
request did not match
Disconnect or CoA Number of RADIUS-initiated disconnect or CoA packets dropped because
Packets Dropped of queue overflow
No Secret Number of messages rejected because a secret was not present in the
authenticator field
Unknown Request Number of packets received with an invalid RADIUS code for RADIUS
disconnect or change of authorization
Invalid Addresses Number of invalid addresses received
Received
show radius servers
show radius statistics
Display information about only secure CLACL configurations. This command and the
output are visible only to authorized users—the mirror-enable command must be enabled
before using this command. Use the brief or detail keywords with the show secure
classifier-list command to display different levels of information.
To display a list of secure CLACLs
Copyright © 2010, Juniper Networks, Inc.