Table 44: Show Rate-Limit-Profile Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

JunosE 11.3.x Policy Management Configuration Guide
Meaning
204
Conformed rate action:
Exceeded rate action:
IP Rate-Limit-Profile: rlp
Profile Type:
Color-aware
Reference count:
Committed rate:
Committed burst:
Peak rate:
Peak burst:
Mask:
Committed rate action:
Conformed rate action:
Exceeded rate action:
L2TP Rate-Limit-Profile: L2tpRlp
Profile Type:
Reference count:
Committed rate:
Committed burst:
Peak rate:
Peak burst:
Committed rate action:
Conformed rate action:
Exceeded rate action:
Table 44 on page 204 lists the show rate-limit-profile command output fields.

Table 44: show rate-limit-profile Output Fields

Field Name
Rate-Limit-Profile
Profile Name
Profile Type
Reference count
Color-aware
Committed rate
Committed burst
Excess burst
Peak rate
transmit
drop
two-rate hierarchical
no
0
0
8192
0
8192
255
transmit unconditional
transmit conditional
drop
two-rate
0
0
8192
0
8192
transmit
transmit
drop
Field Description
Create a rate limit profile
Name of the rate-limit profile
One-rate, two-rate, or hierarchical profile
Number of policy lists that reference this
rate-limit profile
Color-aware action (yes or no) taken for profile
Target rate for the traffic, in bits per second
Amount of bandwidth allocated to
accommodate bursty traffic, in bytes
Amount of bandwidth allocated to
accommodate a packet in progress when the
rate is in excess of the burst, in bytes
Amount of bandwidth allocated to
accommodate traffic flow in excess of the
committed rate, in bits per second
Copyright © 2010, Juniper Networks, Inc.