Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 166

JunosE 11.3.x Policy Management Configuration Guide
142
Create an aggregate rate limit that can be shared across multiple interfaces. Create
1.
an external parent group to hold this rate limit.
host1(config)#rate-limit-profile AGG two-rate hierarchical
host1(config-rate-limit-profile)#committed-rate 1000000
host1(config-rate-limit-profile)#committed-action transmit final
host1(config-rate-limit-profile)#exit
host1(config)#parent-group EPG1
host1(config-parent-group)#rate-limit-profile AGG
host1(config-parent-group)#exit
Create a policy list to be attached to all voice sessions.
2.
host1(config)#rate-limit-profile VOICE_RATE two-rate hierarchical
host1(config-rate-limit-profile)#committed-rate 64000
host1(config-rate-limit-profile)#committed-action transmit unconditional
host1(config-rate-limit-profile)#exit
host1(config)#policy-parameter A hierarchical
host1(config-policy-parameter)#exit
host1(config)#ip policy-list IP_POL1
host1(config-policy-list)#classifier-group * external parent-group EPG1
parameter A
host1(config-policy-list-classifier-group)#rate-limit-profile VOICE_RATE
host1(config-policy-list-classifier-group)#exit
host1(config-policy-list)#exit
Create a policy list to attach to all other sessions.
3.
host1(config)#ip policy-list IP_POL2
host1(config-policy-list)#classifier-group * external parent-group EPG1
parameter A
host1(config-policy-list-classifier-group)#forward
host1(config-policy-list-classifier-group)#exit
host1(config-policy-list)#exit
Attach IP_POL1 to the voice session of first user and attach IP_POL2 to the other
4.
session for the same user. Specify the same ID for parameter A.
host1(config)#interface fastEthernet 3/0.1
host1(config-interface)#vlan id 1
host1(config-interface)#exit
host1(config)#interface ip 3/0.1.1
host1(config-interface)#ip policy-parameter hierarchical A 1
host1(config-interface)#ip policy input IP_POL1 statistics enable
host1(config-interface)#exit
host1(config)#interface fastEthernet 3/0.2
host1(config-interface)#vlan id 2
host1(config-interface)#exit
host1(config)#interface ip 3/0.2.1
host1(config-interface)#ip policy-parameter hierarchical A 1
host1(config-interface)#ip policy input IP_POL2 statistics enable
host1(config-interface)#exit
Attach IP_POL1 to the voice session of the second user and attach IP_POL2 to the
5.
other session for the same user. Specify a different ID for parameter A.
host1(config)#interface ip 3/0.1.2
host1(config-interface)#ip policy-parameter hierarchical A 2
host1(config-interface)#ip policy input IP_POL1 statistics enable
Copyright © 2010, Juniper Networks, Inc.