Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 222

JunosE 11.3.x Policy Management Configuration Guide
198
VLAN Policy routeForVlan
Administrative state: enable
Reference count:
Classifier control list: lowLatencyLowDrop, precedence 100
traffic-class lowLatencyLowDrop
color green
mark-user-priority 7
Classifier control list: lowLatency, precedence 100
traffic-class lowLatency (suspended)
Classifier control list: excellentEffort, precedence 100
traffic-class excellentEffort
Classifier control list: bestEffort, precedence 100
traffic-class bestEffort
To display component policies:
host 1#show policy-list comp_p1
IP Policy comp_p1
Administrative state: enable
Reference count:
Classifier control list: C1, precedence 90
forward
Virtual-router: default
List:
next-hop 10.1.1.1, order 100, rule 2 (active)
Classifier control list: C2, precedence 10
filter
Referenced by interfaces:
ATM3/0.3 input policy, statistics enabled, virtual-router vr1
ATM3/0.4 output policy, statistics disabled, virtual-router vr1
ATM3/0.5 secondary-input policy, statistics enabled, virtual-router vr1
Referenced by profiles:
prof_1 input policy, statistics disabled
Referenced by merge policies:
mpl_10
mpl_11
mpl_12
host1#show policy-list comp_p2
IP Policy comp_p2
Administrative state: enable
Reference count:
Classifier control list: C1, precedence 90
color red
Classifier control list: *, precedence 1000
filter
Referenced by interfaces:
ATM4/0.5 input policy, statistics enabled, virtual-router default
Referenced by profiles:
None
Referenced by merge policies:
None
0
Policy Table
------ -----
7
Policy Table
------ -----
1
Copyright © 2010, Juniper Networks, Inc.