Figure 14: Interface Stack For Arbitrary Interface Groups; Figure 15: Arbitrary Interface Groups Configuration - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual
Software for e series broadband services routers policy management configuration guide
Hide thumbs
Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04:
- Reference manual (284 pages) ,
- Configuration manual (632 pages)
Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Figure 14: Interface Stack for Arbitrary Interface Groups
This example uses the following:
At I1 and I3:
VOICE_RATE, Committed Rate: 64 Kbps
Peak Rate: 0 Mbps
Committed Action: transmit unconditional
Conformed Action: drop
Exceeded Action: drop
At I2 and I4:
No policer configured
I1 and I2 feed into a single policer with the following configuration: AGG, Committed
Rate: 1 Mbps, Peak Rate: 0 Mbps, Committed Action: transmit, Conformed Action:
drop, Exceeded Action: drop
Figure 15: Arbitrary Interface Groups Configuration
Chapter 7: Creating Hierarchical Policies for Interface Groups
141
Advertisement
Table of Contents
