Table 16: Shorthand Notation Mapping - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

Software for e series broadband services routers policy management configuration guide
Hide thumbs Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04:
Table of Contents

Advertisement

Table 16: Shorthand Notation Mapping

Shorthand
number
Shorthand
1
ATM-VP vpi
2
ATM-VC
3
Ethernet
4
VLAN
5
SVLAN
Copyright © 2010, Juniper Networks, Inc.
There are two types of values that a hierarchical policy parameter can take: numeric and
keyword. Keywords are resolved to numeric values during configuration of a policy
parameter at the interface.
The following example assigns a value of 10 to policy parameter A in Global Configuration
mode.
host1(config)#policy-parameter A hierarchical
host1(config-policy-parameter)#aggregation-node 10
host1(config-policy-parameter)#exit
The following example assigns value 1 to policy parameter A and value 2 to policy
parameter B in Interface Configuration mode. Also, the value configured for parameter
A in interface fast3/0.1 overrides the value configured in the previous example.
host1(config)#interface fastEthernet 3/0.1
host1(config-interface)#ip policy-parameter hierarchical A 1
host1(config-interface)#ip policy-parameter hierarchical B 2
host1(config-interface)#exit
The following example assigns keyword vlan to parameter C in Global Configuration
mode.
host1(config)#policy-parameter C hierarchical
host1(config-policy-parameter)#aggregation-node vlan
host1(config-policy-parameter)#exit
The following example assigns keyword atm-vc to parameter C in Interface Configuration
mode. Policy parameter C is assigned with interface type atm-vc for IP interface at
atm3/0.1. The keyword atm-vc is resolved to the identifier of the ATM minor interface
on which the IP interface atm3/0.1 is stacked.
host1(config)#interface atm 3/0.1
host1(config-interface)#ip policy-parameter hierarchical C atm-vc
host1(config-interface)#exit
The following keywords are supported: atm-vc, atm-vp, atm, ethernet, vlan, svlan, fr-vc,
forwarding, and ppp-interface. Table 16 on page 125 indicates the mapping of shorthand
notation to actual value that are used internally.
Value
Identifier constructed from slot, adapter, port, ATM
VP id.
Unique identifier of the ATM minor interface
Unique identifier of Ethernet major interface
Unique identifier of VLAN interface
Identifier constructed from slot, adapter, port, SVLAN
ID.
Chapter 7: Creating Hierarchical Policies for Interface Groups
Supported in
IP, IPv6, L2TP, and MPLS policies
IP, IPv6, and MPLS policies
IP, IPv6, and MPLS policies
IP, IPv6, and MPLS policies
IP, IPv6, L2TP, and MPLS policies
125

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents