Figure 18: Interface Stack For Hierarchical Policy Configuration - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

JunosE 11.3.x Policy Management Configuration Guide
IPv4 I1
148
Classified Video Flow. VIDEO_RATE, Committed Rate: 1 Mbps
Peak Rate: 0 Mbps
Committed Action: transmit unconditional
Conformed Action: drop
Exceeded Action: drop
All classified video flow policers over each PPP interface feed into a single policer with
the following configuration:
At I1 and I3:
All Flows. SESSION_RATE, Committed Rate: 3 Mbps
Peak Rate: 0 Mbps
Committed Action: transmit conditional
Conformed Action: drop
Exceeded Action: drop
At I2 and I4:
All Flows. SESSION_RATE, Committed Rate: 5Mbps
Peak Rate: 0 Mbps
Committed Action: transmit conditional
Conformed Action: drop
Exceeded Action: drop

Figure 18: Interface Stack for Hierarchical Policy Configuration

IPv6 I2
PPP 1
Create a hierarchical policy parameter list for PPP interfaces.
1.
host1(config)#policy-parameter P1_PPP hierarchical
host1(config-policy-parameter)#exit
Create a reference rate parameter to be used in external parent groups associated
2.
with PPP sessions.
host1(config)#policy-parameter sessionRlpRate reference-rate
host1(config-policy-parameter)#reference-rate 3000000
IPv4 I3
PPP 2
vlan
Copyright © 2010, Juniper Networks, Inc.
IPv6 I4